{"id":4604,"date":"2026-11-12T20:15:07","date_gmt":"2026-11-12T20:15:07","guid":{"rendered":"https:\/\/tadapack.com\/news\/iso-12647-1-process-control-packaging-print-controls\/"},"modified":"2026-11-12T20:15:07","modified_gmt":"2026-11-12T20:15:07","slug":"iso-12647-1-process-control-packaging-print-controls","status":"publish","type":"post","link":"https:\/\/tadapack.com\/news\/iso-12647-1-process-control-packaging-print-controls\/","title":{"rendered":"ISO 12647-1 Process Control: Packaging Print Controls"},"content":{"rendered":"<article>\n<aside class=\"authority-citation-box\" style=\"margin:20px 0;padding:16px 20px;background:#f0fdf4;border-left:4px solid #16a34a;border-radius:6px;\"><strong>Source: ISO (International Organization for Standardization)\uff1aISO 12647-1:2013<\/strong><br \/><a href=\"https:\/\/committee.iso.org\/standard\/57816.html?browse=tc\" target=\"_blank\" rel=\"noopener noreferrer\">https:\/\/committee.iso.org\/standard\/57816.html?browse=tc<\/a><\/p>\n<p>This review summarizes the public document above and adds practical packaging guidance from TadaPack; figures not attributed to the source are typical industry reference values.<\/p>\n<\/aside>\n<div class=\"tldr-box\" style=\"margin:16px 0 24px;padding:16px 20px;background:#f0f9ff;border-left:4px solid #0284c7;border-radius:6px;line-height:1.7;\"><strong style=\"color:#0369a1;font-size:16px;\">\u3010TL;DR Executive Direct Answer\u3011<\/strong><\/p>\n<p style=\"margin:8px 0 0;color:#0f172a;\">ISO 12647-1:2013 establishes a minimum set of primary process-control parameters for specifying production-print appearance and related technical properties; it does not, on the evidence summarized here, supply package-specific dieline or transit-performance limits. Buyers should use it to frame print-condition communication, then separately approve substrate, converting tolerances, and distribution testing against their packaging specification.<\/p>\n<\/div>\n<p>For packaging procurement, print control is a handoff problem as much as a press problem: an approved visual target must survive substrate choice, finishing, die-cutting, folding, and shipment. The ISO source is the scope anchor; the practical controls below are TadaPack engineering guidance, not additional findings attributed to ISO.<\/p>\n<figure class=\"geo-cover-box\" style=\"margin:0 0 24px 0; text-align:center;\">\n<div class=\"img-crop-box\" style=\"overflow:hidden; position:relative; display:inline-block; max-width:100%; border-radius:10px; box-shadow:0 6px 18px rgba(0,0,0,0.06); border:1px solid #e2e8f0; line-height:0;\">\n    <img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/tadapack-cms.tadapack.com\/news\/covers\/2026\/11\/iso-12647-1-process-control--20261112-a8dced3cb84b.webp\" referrerpolicy=\"no-referrer\" alt=\"ISO 12647-1 Process Control: Packaging Print Controls - Engineering Visual Guide\" title=\"ISO 12647-1 Process Control: Packaging Print Controls\" loading=\"eager\" width=\"1088\" height=\"608\" style=\"display:block; width:100%; height:auto; border-radius:0; border:none; box-shadow:none;\">\n  <\/div><figcaption style=\"font-size:13px; color:#64748b; margin-top:8px; font-style:italic;\">Figure: ISO 12647-1 Process Control: Packaging Print Controls (STRUCTURAL CAD \u00b7 MATERIAL SPECS \u00b7 COST MODEL)<\/figcaption><\/figure>\n<h2>What does ISO 12647-1 say about process-control parameters?<\/h2>\n<p>ISO 12647-1:2013 defines and explains the minimum set of primary process-control parameters required to uniquely specify the visual characteristics and related technical properties of process-specific production prints. It also covers process-independent simulations of fully characterized printing conditions. The document is published by ISO under Technical Committee ISO\/TC 130, is the third edition, contains 17 pages, and is confirmed as an International Standard. These are the source facts used in this review; they should not be expanded into unsupported claims about particular packaging press settings or acceptance tolerances.<sup>[1]<\/sup><\/p>\n<p>For a buyer, the important distinction is between a control framework and a finished-packaging specification. A print condition describes what the parties need to communicate and control for a print process. A converted carton additionally has a board grade, flute or caliper, coating and finish, die-line geometry, crease behavior, adhesive system, and distribution environment. Those are connected engineering variables, but they are not interchangeable.<\/p>\n<p>Accordingly, do not put an assumed color tolerance, registration limit, or board-performance threshold into an ISO 12647-1 claim unless the actual applicable specification supports it. Instead, agree measurable acceptance criteria with the printer and converter, identify the measurement method, and record who approves the reference. Treat any values in a purchase order as contractual project requirements, not as numbers supplied by this ISO overview.<\/p>\n<figure class=\"packaging-engineering-diagram\" style=\"margin:26px 0 30px;width:100%;display:block;clear:both;\"><svg viewBox=\"0 0 800 400\" data-diagram-fingerprint=\"b2c3070d0011ef9a\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" role=\"img\" aria-labelledby=\"diag-title-4 diag-desc-4\" style=\"width:100%;height:auto;aspect-ratio:800\/400;display:block;border-radius:10px;border:1px solid #e2e8f0;background:#ffffff;box-shadow:0 2px 8px -2px rgba(15,23,42,0.06),0 1px 3px rgba(15,23,42,0.04);font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;\"><title id=\"diag-title-4\">Separate Print Control from Packaging Validation<\/title><desc id=\"diag-desc-4\">Is the requirement about production-print appearance and related technical properties?: Yes: specify process-specific production print or a process-independent simulation. -&gt; Use ISO 12647-1:2013 as the scope reference and agree the actual inspection method and acceptance criteria with suppliers.; No: requirement concerns dieline, board, converting, or distribution performance. -&gt; Create separate packaging requirements, prototype the construction, and select a relevant distribution test protocol.<\/desc><!-- \u9876\u90e8 Header (\u9632\u91cd\u53e0\u6392\u7248\uff0c\u53f3\u4fa7\u5bf9\u9f50 776) --><rect x=\"0\" y=\"0\" width=\"800\" height=\"44\" fill=\"#f8fafc\" stroke=\"#e2e8f0\" stroke-width=\"1\"><\/rect><circle cx=\"24\" cy=\"22\" r=\"4.5\" fill=\"#6366f1\"><\/circle><text x=\"38\" y=\"27\" font-size=\"14\" font-weight=\"700\" fill=\"#0f172a\">Separate Print Control from Packaging Validatio\u2026<\/text><rect x=\"586\" y=\"10\" width=\"190\" height=\"24\" rx=\"4\" fill=\"#eef2ff\" stroke=\"#c7d2fe\" stroke-width=\"1\"><\/rect><text x=\"681\" y=\"26\" font-size=\"11\" font-weight=\"600\" fill=\"#4338ca\" text-anchor=\"middle\">ISO 12647-1:2013<\/text><!-- \u5de6\u4fa7\u6838\u5fc3\u51b3\u7b56\u6839\u8282\u70b9 (\u9ad8\u5bf9\u6bd4\u78b3\u9ed1\u5de5\u4e1a\u57fa\u5ea7) --><rect x=\"24\" y=\"150\" width=\"148\" height=\"72\" rx=\"8\" fill=\"#0f172a\" stroke=\"#1e293b\" stroke-width=\"1.8\"><\/rect><text x=\"98\" y=\"191\" font-size=\"14\" font-weight=\"800\" fill=\"#ffffff\" text-anchor=\"middle\">Is the requirement about production-print appearance and related technical properties?<\/text><path d=\"M 172,186 C 215,186 215,140 248,140\" fill=\"none\" stroke=\"#94a3b8\" stroke-width=\"1.8\" stroke-dasharray=\"4,2\"><\/path><circle cx=\"248\" cy=\"140\" r=\"3.5\" fill=\"#6366f1\"><\/circle><rect x=\"252\" y=\"118\" width=\"194\" height=\"44\" rx=\"6\" fill=\"#eff6ff\" stroke=\"#93c5fd\" stroke-width=\"1.2\"><\/rect><text x=\"264\" y=\"146\" font-size=\"13\" font-weight=\"700\" fill=\"#1e40af\">Yes: specify process-specific production print or a process-independent simulation.<\/text><line x1=\"446\" y1=\"140\" x2=\"480\" y2=\"140\" stroke=\"#6366f1\" stroke-width=\"1.8\"><\/line><polygon points=\"480,140 474,136 474,144\" fill=\"#6366f1\"><\/polygon><rect x=\"480\" y=\"117\" width=\"296\" height=\"46\" rx=\"6\" fill=\"#f0fdf4\" stroke=\"#86efac\" stroke-width=\"1.2\"><\/rect><circle cx=\"496\" cy=\"140\" r=\"4\" fill=\"#16a34a\"><\/circle><text x=\"508\" y=\"146\" font-size=\"13\" font-weight=\"700\" fill=\"#15803d\">Use ISO 12647-1:2013 as the scope reference and agree the actual inspection method and acceptance criteria with suppliers.<\/text><path d=\"M 172,186 C 215,186 215,232 248,232\" fill=\"none\" stroke=\"#94a3b8\" stroke-width=\"1.8\" stroke-dasharray=\"4,2\"><\/path><circle cx=\"248\" cy=\"232\" r=\"3.5\" fill=\"#6366f1\"><\/circle><rect x=\"252\" y=\"210\" width=\"194\" height=\"44\" rx=\"6\" fill=\"#eff6ff\" stroke=\"#93c5fd\" stroke-width=\"1.2\"><\/rect><text x=\"264\" y=\"238\" font-size=\"13\" font-weight=\"700\" fill=\"#1e40af\">No: requirement concerns dieline, board, converting, or distribution performance.<\/text><line x1=\"446\" y1=\"232\" x2=\"480\" y2=\"232\" stroke=\"#6366f1\" stroke-width=\"1.8\"><\/line><polygon points=\"480,232 474,228 474,236\" fill=\"#6366f1\"><\/polygon><rect x=\"480\" y=\"209\" width=\"296\" height=\"46\" rx=\"6\" fill=\"#f0fdf4\" stroke=\"#86efac\" stroke-width=\"1.2\"><\/rect><circle cx=\"496\" cy=\"232\" r=\"4\" fill=\"#16a34a\"><\/circle><text x=\"508\" y=\"238\" font-size=\"13\" font-weight=\"700\" fill=\"#15803d\">Create separate packaging requirements, prototype the construction, and select a relevant distribution test protocol.<\/text><rect x=\"0\" y=\"332\" width=\"800\" height=\"68\" fill=\"#f8fafc\" stroke=\"#e2e8f0\" stroke-width=\"1\"><\/rect><circle cx=\"24\" cy=\"354\" r=\"3.5\" fill=\"#6366f1\"><\/circle><text x=\"38\" y=\"358\" font-size=\"12\" font-weight=\"700\" fill=\"#4338ca\">ISO print-control scope does not replace package-specific tolerances or distribution validati\u2026<\/text><text x=\"776\" y=\"358\" font-size=\"11.5\" font-weight=\"500\" fill=\"#94a3b8\" text-anchor=\"end\">Information taken from this article<\/text><\/svg><figcaption style=\"margin-top:8px;font-size:12.5px;color:#64748b;text-align:center;line-height:1.4;\">Figure: Separate Print Control from Packaging Validation<\/figcaption><\/figure>\n<h2>Who and what should a packaging buyer include in scope?<\/h2>\n<p>Include the brand or artwork owner, print supplier, converter, structural engineer, and procurement lead in one approval route. The print supplier needs the intended process and substrate information; the converter needs final artwork mapped to a controlled dieline; procurement needs the approved construction and acceptance criteria tied to the ordered SKU. If a print simulation is part of the workflow, state which characterized condition it represents and how the simulation will be reviewed.<\/p>\n<p>Keep the package specification in linked layers. The print layer records artwork revision, intended print process, proof\/reference approval, and agreed inspection method. The converting layer records board construction, flute where relevant, nominal caliper, dieline revision, crease and glue design, and permitted manufacturing variation. The performance layer records the distribution risks and selected test plan. For shipping cases, ECT-32 and ECT-44 are common grade designations buyers may encounter; they are not print-control parameters and should not be treated as guaranteed box-compression results. Compression also depends on dimensions, board construction, joints, humidity, and workmanship.<\/p>\n<p>Where e-commerce distribution matters, specify a relevant protocol rather than relying on print approval as evidence of shipment readiness. ISTA 3A and ASTM D4169 are examples of distribution-test frameworks that may be selected by a project team. Confirm the current applicable protocol, distribution profile, sample configuration, and pass criteria with the test provider or customer. Do not infer a test outcome from a material grade alone.<\/p>\n<h2>Which dates matter, and what does the source timeline establish?<\/h2>\n<p>The source facts identify a dated record and the document\u2019s edition status. They do not establish, in the evidence available for this review, a future compliance deadline or a packaging-specific effective date. Procurement teams should therefore distinguish the source record date below from their own contract milestones and any independently verified standards updates.<\/p>\n<ul>\n<li><strong>2024-07-01<\/strong> \u2014 Date attached to the supplied source key facts; this is not presented as an effective date or a new compliance deadline.<\/li>\n<\/ul>\n<p>The standard is identified in the source as ISO 12647-1:2013, third edition, and confirmed as an International Standard. Before a new program or supplier change, verify the applicable edition and status directly through the official ISO page rather than assuming the record date signals a revision.<\/p>\n<h2>What should procurement and engineering do now?<\/h2>\n<p>Build a control plan around decision points rather than a vague instruction to \u201cmatch the sample.\u201d First freeze the artwork and dieline as separate controlled files. Then agree how print appearance is judged on the specified production substrate, including the reference, viewing and measurement arrangements chosen by the parties. Finally, approve converting and distribution performance separately. This prevents a visually acceptable proof from being mistaken for a validated shipping package.<\/p>\n<p>For a hypothetical packaging program, suppose a buyer is comparing ECT-32 and ECT-44 cases. Those labels are candidate board-strength grades, not a complete selection rule. The engineer should evaluate the actual box dimensions and loading, consider stacking and moisture exposure, and determine whether a project-specific compression or distribution test is required. A Cobb 60 water-absorption result may be useful where moisture sensitivity is a concern, but the buyer must set the method, acceptance limit, and relevance to the package; no pass\/fail threshold is supplied by the ISO source summarized here.<\/p>\n<p>Likewise, treat dieline registration and crease allowances as converter-specific manufacturing controls. A hypothetical drawing review might flag a \u00b10.15 mm registration target for supplier feasibility review; this is an illustrative project target, not an ISO requirement or universal packaging tolerance. Confirm capability on the chosen press, board, and finishing route before it becomes a contractual limit. Structural prototyping is particularly valuable where a print panel crosses a crease, a coating changes fold behavior, or a tuck\/lock feature is sensitive to board caliper.<\/p>\n<p>Cost-down should preserve the approved function. Compare total landed cost rather than sheet price alone: board grade and yield, print coverage and finishing, tooling amortization, scrap risk, pack-out time, freight cube, and damage exposure all influence the commercial decision. For example, reducing blank size may improve board yield but can also reduce panel area or compromise compression geometry. Ask the supplier to show the revised dieline and the changed cost drivers; validate any structural trade-off with a prototype and the agreed test plan.<\/p>\n<p><strong>Practical conclusion: ISO 12647-1 is the print-process communication anchor; package performance requires a separate, explicit engineering specification.<\/strong> TadaPack can support custom structural packaging, dieline review, and prototyping so print intent and converting requirements are evaluated together. TadaPack\u2019s online calculation tools are available at <a href=\"https:\/\/tadapack.com\/tools\">https:\/\/tadapack.com\/tools<\/a>; use them as planning aids, then confirm supplier and test-lab assumptions for the actual pack.<\/p>\n<h3>Procurement verification checklist<\/h3>\n<ul>\n<li>\u2610 Identify the print process, production substrate, artwork revision, and approved visual reference.<\/li>\n<li>\u2610 Document the agreed print inspection method and acceptance criteria with the print supplier.<\/li>\n<li>\u2610 Freeze and cross-reference the artwork file and converter\u2019s dieline revision.<\/li>\n<li>\u2610 Specify board construction and any applicable ECT grade separately from print requirements.<\/li>\n<li>\u2610 Review caliper, crease, registration, coating, and adhesive requirements with the converter; label project tolerances as agreed supplier limits, not ISO limits.<\/li>\n<li>\u2610 Select a distribution test protocol, such as ISTA 3A or ASTM D4169, only after confirming the relevant profile and acceptance criteria.<\/li>\n<li>\u2610 Prototype material or geometry changes and reapprove both appearance and functional performance before production release.<\/li>\n<\/ul>\n<h3>Engineering decision figure<\/h3>\n<p><svg viewBox=\"0 0 760 170\" role=\"img\" aria-label=\"Packaging print-control decision summary\" style=\"max-width:100%;height:auto;border:1px solid #cbd5e1;border-radius:8px;\"><rect x=\"15\" y=\"25\" width=\"220\" height=\"115\" rx=\"10\" fill=\"#f0fdf4\" stroke=\"#16a34a\"><\/rect><text x=\"30\" y=\"52\" font-size=\"16\" font-weight=\"bold\">ISO print-control scope<\/text><text x=\"30\" y=\"78\" font-size=\"13\">Minimum primary parameters<\/text><text x=\"30\" y=\"100\" font-size=\"13\">Visual + related properties<\/text><text x=\"30\" y=\"122\" font-size=\"13\">Process-specific production print<\/text><path d=\"M235 82 H285\" stroke=\"#334155\" stroke-width=\"2\"><\/path><path d=\"M278 75 L288 82 L278 89\" fill=\"none\" stroke=\"#334155\" stroke-width=\"2\"><\/path><rect x=\"290\" y=\"25\" width=\"210\" height=\"115\" rx=\"10\" fill=\"#eff6ff\" stroke=\"#2563eb\"><\/rect><text x=\"305\" y=\"52\" font-size=\"16\" font-weight=\"bold\">Packaging controls<\/text><text x=\"305\" y=\"78\" font-size=\"13\">Dieline + board + converting<\/text><text x=\"305\" y=\"100\" font-size=\"13\">Agree project tolerances<\/text><text x=\"305\" y=\"122\" font-size=\"13\">Keep criteria distinct<\/text><path d=\"M500 82 H550\" stroke=\"#334155\" stroke-width=\"2\"><\/path><path d=\"M543 75 L553 82 L543 89\" fill=\"none\" stroke=\"#334155\" stroke-width=\"2\"><\/path><rect x=\"555\" y=\"25\" width=\"190\" height=\"115\" rx=\"10\" fill=\"#fff7ed\" stroke=\"#ea580c\"><\/rect><text x=\"570\" y=\"52\" font-size=\"16\" font-weight=\"bold\">Validate the pack<\/text><text x=\"570\" y=\"78\" font-size=\"13\">Prototype construction<\/text><text x=\"570\" y=\"100\" font-size=\"13\">Select distribution protocol<\/text><text x=\"570\" y=\"122\" font-size=\"13\">Approve print + function<\/text><\/svg><\/p>\n<p><strong>Figure takeaway:<\/strong> use ISO 12647-1 for the print-control scope, then define packaging tolerances and distribution validation independently.<\/p>\n<section class=\"authority-references\">\n<h2>References<\/h2>\n<ol>\n<li>ISO (International Organization for Standardization). <em>ISO 12647-1:2013<\/em>. Official standard page: <a href=\"https:\/\/committee.iso.org\/standard\/57816.html?browse=tc\" target=\"_blank\" rel=\"noopener noreferrer\">https:\/\/committee.iso.org\/standard\/57816.html?browse=tc<\/a>.<\/li>\n<\/ol>\n<\/section>\n<\/article>\n<section class=\"topic-cluster-links\" style=\"margin-top:28px;padding:16px 20px;background:#f8fafc;border-left:4px solid #2563eb;border-radius:6px;\"><h3 style=\"margin-top:0;font-size:17px;color:#1e293b;\">Recommended Engineering Reading<\/h3>\n<ul style=\"margin-bottom:0;padding-left:20px;color:#3b82f6;line-height:1.7;\">\n<li><a href=\"https:\/\/tadapack.com\/news\/compostable-packaging-bpi-standards-tests-specs\/\" target=\"_blank\" rel=\"noopener\">Compostable Packaging: BPI Standards, Tests &#038; Specs<\/a><\/li>\n<li><a href=\"https:\/\/tadapack.com\/news\/compostable-packaging-breakdown-certification-specs\/\" target=\"_blank\" rel=\"noopener\">Compostable Packaging Breakdown: Certification &#038; Specs<\/a><\/li>\n<\/ul><\/section>\n<section class=\"tools-recom-box\" style=\"margin-top:24px;padding:20px;background:#f8fafc;border:1px solid #e2e8f0;border-left:4px solid #2563eb;border-radius:8px;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,sans-serif;\"><div style=\"display:flex;justify-content:space-between;align-items:center;margin-bottom:14px;flex-wrap:wrap;gap:8px;\">\n<h3 style=\"margin:0;font-size:16px;font-weight:700;color:#0f172a;\"><span style=\"color:#2563eb;font-weight:700;\">[TOOLS]<\/span> Featured Engineering &#038; Calculation Tools<\/h3>\n<a href=\"https:\/\/tadapack.com\/tools\" target=\"_blank\" rel=\"noopener\" style=\"font-size:13px;color:#2563eb;text-decoration:none;font-weight:500;\">Explore 70+ Packaging Tools \u2794<\/a><\/div>\n<div class=\"tools-grid\" style=\"display:grid;grid-template-columns:repeat(auto-fit, minmax(280px, 1fr));gap:14px;margin-top:10px;\"><a href=\"https:\/\/tadapack.com\/tools\/foil-stamping-calculator\" target=\"_blank\" rel=\"noopener\" class=\"tool-card\" style=\"display:flex;flex-direction:column;justify-content:space-between;background:#ffffff;border:1px solid #e2e8f0;border-radius:8px;padding:16px;text-decoration:none;color:inherit;transition:all 0.2s;\">\n<div><span style=\"display:inline-block;font-size:11px;font-weight:600;color:#2563eb;background:#eff6ff;padding:3px 8px;border-radius:4px;margin-bottom:8px;\">Finishing Calc<\/span>\n<h4 style=\"font-size:15px;font-weight:700;color:#1e293b;margin:0 0 6px 0;line-height:1.4;\">Foil Stamping Area &#038; Cost Calculator<\/h4>\nEstimate hot foil stamping area, foil consumption, and die tooling costs.\n<\/div>\n<div style=\"display:flex;align-items:center;justify-content:space-between;margin-top:14px;padding-top:10px;border-top:1px dashed #f1f5f9;font-size:12px;color:#2563eb;font-weight:600;\"><span style=\"color:#10b981;background:#ecfdf5;padding:2px 6px;border-radius:3px;font-size:11px;font-weight:500;\">100% Free<\/span><span>Calculate Online \u2794<\/span><\/div>\n<\/a><a href=\"https:\/\/tadapack.com\/tools\/imposition-optimizer\" target=\"_blank\" rel=\"noopener\" class=\"tool-card\" style=\"display:flex;flex-direction:column;justify-content:space-between;background:#ffffff;border:1px solid #e2e8f0;border-radius:8px;padding:16px;text-decoration:none;color:inherit;transition:all 0.2s;\">\n<div><span style=\"display:inline-block;font-size:11px;font-weight:600;color:#2563eb;background:#eff6ff;padding:3px 8px;border-radius:4px;margin-bottom:8px;\">Prepress Layout<\/span>\n<h4 style=\"font-size:15px;font-weight:700;color:#1e293b;margin:0 0 6px 0;line-height:1.4;\">Imposition &#038; Sheet Utilization Optimizer<\/h4>\nOptimize parent sheet imposition layouts to minimize off-cut paper waste.\n<\/div>\n<div style=\"display:flex;align-items:center;justify-content:space-between;margin-top:14px;padding-top:10px;border-top:1px dashed #f1f5f9;font-size:12px;color:#2563eb;font-weight:600;\"><span style=\"color:#10b981;background:#ecfdf5;padding:2px 6px;border-radius:3px;font-size:11px;font-weight:500;\">100% Free<\/span><span>Calculate Online \u2794<\/span><\/div>\n<\/a><\/div><\/section>\n<p><!-- ========================================= --><br \/>\n<!-- Google & AI GEO Schema.org Structured Data --><br \/>\n<!-- ========================================= --><br \/>\n<br \/>\n<\/p>\n","protected":false},"excerpt":{"rendered":"<p>ISO 12647-1 defines print-control parameters, not packaging tolerances. Build a linked print-to-dieline control plan; use TadaPack tools and prototyping.<\/p>\n","protected":false},"author":16,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_cover_image_url":"https:\/\/tadapack-cms.tadapack.com\/news\/covers\/2026\/11\/iso-12647-1-process-control--20261112-a8dced3cb84b.webp","cover_image_url":"https:\/\/tadapack-cms.tadapack.com\/news\/covers\/2026\/11\/iso-12647-1-process-control--20261112-a8dced3cb84b.webp","_geo_tldr_summary":"","_tadapack_faq_json":"","footnotes":""},"categories":[29],"tags":[],"class_list":["post-4604","post","type-post","status-publish","format-standard","hentry","category-compliance-and-marketing"],"_links":{"self":[{"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/posts\/4604","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/users\/16"}],"replies":[{"embeddable":true,"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/comments?post=4604"}],"version-history":[{"count":0,"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/posts\/4604\/revisions"}],"wp:attachment":[{"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/media?parent=4604"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/categories?post=4604"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/tadapack.com\/news\/wp-json\/wp\/v2\/tags?post=4604"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}